Bio Healing Australia

Wireless Red & Infrared Light Foot Wrap

$269

Your feet do the hard work. Make a little time for them.

Put your feet up—not your routine on hold.

Turn a quiet moment on the sofa into your own at-home light session. The Bio Healing Wireless Red & Infrared Light Foot Wrap combines red light, near-infrared light and adjustable heating in a wearable, boot-style design.

No handheld device to keep repositioning. No large light panel to set up. Just an adjustable wrap with built-in controls, so you can settle into your session while reading or watching your favourite programme.

Wrap it. Choose your settings. Take a moment for yourself.

Why you’ll love it

  • Hands-free convenience: The wrap stays in position without needing to hold a device against your foot.
  • Wireless operation: Use it without a trailing power cable during your session, following the manufacturer’s instructions.
  • Foot-and-ankle coverage: Its boot-style shape brings the light array around your foot and ankle rather than covering only a small spot.
  • Adjustable fastening straps: Open the wrap, position your foot and adjust the straps to fit within the product’s size range.
  • Five light levels: Choose from the available light-output settings instead of one fixed intensity.
  • Adjustable heating: Three selectable heating settings give you another way to configure your session.
  • Built-in timer: Choose a 10-, 20- or 30-minute setting, as permitted by the manual.
  • Control lock: Helps prevent accidental button presses from changing your settings.

A simpler setup for your downtime

A home routine shouldn’t feel like another job.

Unlike a handheld light device, this wrap doesn’t require you to continually hold it in place. Its adjustable straps secure the boot-style design around your foot and ankle, leaving your hands free.

Read a chapter. Watch a programme. Enjoy a quiet moment—while remaining awake and monitoring your session as instructed.

Less holding and repositioning. More convenience.

Red and near-infrared light in one wrap

The integrated light array combines:

  • 660nm red light: Visible red light.
  • 850nm near-infrared light: Light outside the visible spectrum.

Both wavelengths are incorporated into the same wrap, so there’s no need to switch between separate devices.

Near-infrared light may not look illuminated to your eyes. Always check operation according to the supplied instructions rather than visible brightness alone.

Choose your light level

With five selectable light levels, you can configure the light output using the built-in controller.

The display shows the selected level, helping you check your settings at a glance. Follow the manual when choosing an intensity—higher output does not automatically mean a better result.

Light and heating in one wearable design

Alongside its light settings, the wrap includes three manufacturer-listed heating settings: 45°C, 50°C and 55°C.

Use heating only as directed and choose settings appropriate to the manufacturer’s safety guidance. These are device settings, not a promise of the temperature your skin will reach.

Important: Heat can cause burns, particularly if you have reduced sensation or cannot reliably judge temperature. Read all warnings before use; do not assume the lowest setting is suitable for everyone.

Set a session—not an overnight treatment

The controller offers 10-, 20- and 30-minute timer options, and the manufacturer specifies automatic shutdown after 30 minutes.

That gives your routine a defined session window rather than leaving the device running indefinitely.

The timer is a convenience feature, not a substitute for monitoring use. Stay awake and follow the manual’s session limits.

Settings that stay where you put them

An accidental-touch lock helps prevent unintended changes to the controls during use.

The integrated display also provides information about the selected settings and battery status, keeping the controls together on the wrap rather than on a separate trailing controller.

Product features

  • Design: Adjustable boot-style foot and ankle wrap
  • Operation: Wireless
  • Light wavelengths: 660nm red and 850nm near-infrared
  • Light levels: Five selectable levels
  • Timer settings: 10, 20 or 30 minutes
  • Heating settings: Manufacturer-listed 45°C, 50°C and 55°C
  • Automatic shutdown: After 30 minutes
  • Controls: Integrated display and buttons
  • Control lock: Accidental-touch prevention
  • Fastening: Adjustable straps

How to use

  1. Read the manual first. Check all warnings, restrictions and charging instructions.
  2. Open and position the wrap. Fit it around your foot and ankle as directed.
  3. Adjust the straps. Secure it without overtightening.
  4. Select the permitted settings. Follow the guidance for light level, heating and duration.
  5. Remain awake and monitor use. Stop if you experience excessive heat or discomfort.
  6. Switch off and store correctly. Follow the cleaning, cooling and storage instructions.

Frequently asked questions

Is this a walking boot?
It is being offered as a light-and-heating wrap, not footwear or a medical support boot. Do not walk in it unless the manufacturer expressly permits this.

Does it cover the ankle as well as the foot?
The supplier’s images show a boot-style design extending around the foot and ankle. Check the final dimensions and fit range before ordering.

Can I change the light intensity?
Yes. The supplier specifies five selectable light levels.

Can I choose the session length?
The listed timer settings are 10, 20 and 30 minutes. Use only the duration recommended in the manual.

Does it massage or compress my foot?
The supplier’s information reviewed does not establish massage or powered compression features. The straps adjust the fit; they should not be presented as compression treatment.

Will it treat foot pain, arthritis or neuropathy?
This listing does not promise treatment for those conditions. Medical claims require evidence for this exact device and confirmation of the applicable Australian requirements.

Can I use it while sleeping?
No—remain awake during use. Automatic shutdown does not make unattended or overnight use appropriate.

Is it suitable if I have reduced feeling in my feet?
Do not assume it is suitable. Reduced sensation can make it difficult to detect excessive heat. Check the manufacturer’s restrictions and seek medical advice before use.

How do I clean it?
Follow the supplied cleaning instructions. Do not machine-wash or immerse electrical components unless the manufacturer explicitly permits it.

Make your next quiet moment count

Bring red light, near-infrared light and adjustable heating together in one hands-free foot wrap—with settings you can control and a format you can use at home.

Choose the Bio Healing Wireless Light Foot Wrap for a simpler at-home routine.